Expand 移行用の構成ファイル

この構成ファイルは、Expand に登録された Plesk for Linux サーバからの移行時に使用します。

[GLOBAL]
# This section defines global settings and lists the source servers.
 
# [mandatory, non-modifiable] source-type
# Source servers product type.
# The other parameters in this configuration template are listed for this particular type, expand.
# Rather than changing the source-type here, browse the provided configuration templates
# and pick one that best suits your source type.
source-type: expand

# [mandatory, non-modifiable] target-type
# Target servers product type.
target-type: plesk

# [mandatory] source-servers
# Comma-separated list of the sections describing source Plesk servers connected to Expand.
# An arbitrary number of Plesk for Unix servers can be listed here.
# Order is important: Plesk server whose section is listed earlier in this list
# will have priority during conflict resolution.
source-servers: pfu1, pfu2

# [optional] external-db-servers
# Comma-separated list of the sections describing external source database servers.
# It is required to specify external database servers for remote PostgreSQL.
# Otherwise, databases will not be copied.
# external-db-servers: pgsql1
 
# [optional] centralized-mail-servers
# Comma-separated list of the sections describing centralized mail servers
# assigned to the listed source Plesk servers. If the source Plesk servers listed
# in 'source-servers' setting are using a centralized mail server, you must list
# it here. If not specified, migration tool will not transfer the mailboxes and
# other settings located on the centralized mail servers.
# centralized-mail-servers: cm1

# [optional] centralized-dns-servers
# Comma-separated list of the sections describing centralized DNS servers assigned
# to the listed source Plesk servers.
# If not specified, the DNS forwarding will not be set up on the centralized DNS servers.
# centralized-dns-servers: cd1

# [optional] session-dir
# A directory for migration tool's temporary files.
# If not specified, temporary files will be put into 'migration-session'.
# session-dir: migration-session
 
# [optional] zones-ttl
# The time in seconds, which migration tool sets as the SOA minimum TTL and refresh interval
# on a new DNS server.
# If not specified, default value is assumed: 120
# zones-ttl: 120
 
# [optional] external-dns-server
# An IP v4 address of an external DNS server that allows recursive DNS queries.
# Migration tool uses the specified address to test whether general Internet users can obtain
# the correct DNS records for the transferred domains.
# If nothing is specified, migration tool will use Google DNS server (8.8.8.8).
# If 'none' is specified, migration tool will skip this test.
# external-dns-server: 8.8.8.8

# [optional] mail-messages-delta-limit
# The post-migration mail checks compare the number of messages in the source and the target mailboxes.
# If the number of messages differs more than it is specified in "mail-message-count-max-difference",
# it is considered an error.
# If not specified, default value is assumed: 10
# mail-messages-delta-limit: 10

# [optional] website-availability-check-timeout
# Timeout on site response in seconds. When check the availability of site, limit response time.
# If not specified, default value is assumed: 30
# website-availability-check-timeout: 30

# [optional] log-message-context-length
# When logging a multiline output (API request, response), show only top N
# and last N lines. Default value is 0, which means to display full API requests.
# log-message-context-length: 10

[plesk]
# This section defines target panel settings.

# [mandatory] ip
# An IPv4 address of the target Plesk Panel server.
ip:

# [mandatory] os
# Server's operating system type, 'unix' or 'windows'.
os: unix

# [optional] panel-username
# Panel administrator's login. If not specified, 'admin' is used.
# panel-username: admin

# [optional] panel-password
# Panel administrator password. If not specified, it is automatically detected.
# panel-password: setup

# [optional] unix-session-dir
# A directory for temporary files on Plesk Panel for Linux target server. If
# not specified, temporary files will be put into '/tmp'
# unix-session-dir: /tmp

# [optional] is-local
# Whether migration tools are working on the same server as target Plesk.
# Default is true.
# is-local: true

# [optional] apache-restart-interval
# Minimum time interval, in seconds, between Apache restarts during a
# migration. If this interval is short, Apache will restart too often. This
# will cause long downtimes on Plesk target server. If this interval is long,
# existing users of Plesk target server will have to wait longer for their
# changes to be applied. To skip changing Apache restart interval set value to
# 'none'. If not specified, migration tool will skip changing the Apache
# restart interval.
# apache-restart-interval: none

[expand]
# This section defines the settings of Expand control panel server.
 
# [mandatory] ip
# An IP v4 address of the Expand control panel server.
# It does not matter whether this IP address is external or internal, as long as migration tool
# can connect to the server at this address.
ip:

# [mandatory] panel-username
# Expand administrator user name.
panel-username: root

# [mandatory] panel-password
# Expand administrator password.
panel-password:

# [optional] ssh-username
# User name of the privileged system user on Expand control panel server.
# If not specified, 'root' is used.
# ssh-username: root

# [optional] ssh-auth-type
# SSH authentication type.
# There are two authentication types supported: 'password' or 'key'. Default is 'password'.
# ssh-auth-type: password

# [optional] ssh-password
# Password of the privileged system user on Expand control panel server.
# You must specify it, if you select SSH authentication type ‘password’.
# Note that the hash mark in password is treated as a regular symbol.
ssh-password:

# [optional] ssh-key
# SSH private key file name. You can specify it if you select SSL authentication type ‘key’.
# If not specified, "id_rsa" or "id_dsa" keys from ~/.ssh are used.
# ssh-key: id_dsa

[pfu1]
# This section defines settings of source Plesk server 'pfu1'.

# [mandatory] ip
# An IP v4 address of this Plesk server.
ip:

# [mandatory] os
# Server's operating system type, 'unix' or 'windows'. Defines which other parameters
# are required in this section.
os: unix

# [optional] panel-username
# Panel administrator user name. If not specified, 'admin' is used.
# panel-username: admin

# [optional] panel-password
# Panel administrator password. If not specified, it is automatically detected.
# panel-password:

# [optional] ssh-username
# User name of the privileged system user on this Plesk server. If not specified, 'root' is used.
# ssh-username: root

# [optional] ssh-auth-type
# SSH authentication type.
# There are two authentication types supported: 'password' or 'key'. Default is 'password'.
# ssh-auth-type: password

# [optional] ssh-password
# Password of the privileged system user on this Plesk server.
# You must specify it, if you select SSH authentication type ‘password’.
# Note that the hash mark in password is treated as a regular symbol.
ssh-password:

# [optional] ssh-key
# SSH private key file name. You can specify it if you select SSL authentication type ‘key’.
# If not specified, "id_rsa" or "id_dsa" keys from ~/.ssh are used.
# ssh-key: id_dsa

# [optional] session-dir
# A directory for temporary files.
# If not specified, temporary files are put into /tmp.
# session-dir: /tmp

[pfu2]
# This section defines settings of source Plesk server 'pfu2'.

# [mandatory] ip
# An IP v4 address of this Plesk server.
ip:

# [mandatory] os
# Server's operating system type, 'unix' or 'windows'. Defines which other parameters
# are required in this section.
os: unix

# [optional] panel-username
# Panel administrator user name. If not specified, 'admin' is used.
# panel-username: admin

# [optional] panel-password
# Panel administrator password. If not specified, it is automatically detected.
# panel-password:

# [optional] ssh-username
# User name of the privileged system user on this Plesk server. If not specified, 'root' is used.
# ssh-username: root

# [optional] ssh-auth-type
# SSH authentication type.
# There are two authentication types supported: 'password' or 'key'. Default is 'password'.
# ssh-auth-type: password

# [optional] ssh-password
# Password of the privileged system user on this Plesk server.
# You must specify it, if you select SSH authentication type ‘password’.
# Note that the hash mark in password is treated as a regular symbol.
ssh-password:

# [optional] ssh-key
# SSH private key file name. You can specify it if you select SSL authentication type ‘key’.
# If not specified, "id_rsa" or "id_dsa" keys from ~/.ssh are used.
# ssh-key: id_dsa

# [optional] session-dir
# A directory for temporary files.
# If not specified, temporary files are put into /tmp.
# session-dir: /tmp

[pgsql1]
# This optional section defines settings of external PostgreSQL database server 'pgsql1'.
# Fill this section's settings and list it in the 'external-db-servers'
# setting of GLOBAL section to get the databases copied from this server.
# Remove this section otherwise.

# [mandatory] host
# The address of this database server, exactly as displayed in Plesk Panel (usually it equals
# to database server's IP address).
host:

# [mandatory] type
# Type of the database server, the only allowed value is 'postgresql'
type: postgresql

# [mandatory] ip
# An IP v4 address of this database server.
ip:

# [optional] ssh-username
# User name of the privileged system user on this database server. If not specified, 'root' is used.
# ssh-username: root

# [optional] ssh-auth-type
# SSH authentication type.
# There are two authentication types supported: 'password' or 'key'. Default is 'password'.
# ssh-auth-type: password

# [optional] ssh-password
# Password of the privileged system user on this database server.
# You must specify it, if you select SSH authentication type ‘password’.
# Note that the hash mark in password is treated as a regular symbol.
ssh-password:

# [optional] ssh-key
# SSH private key file name. You can specify it if you select SSL authentication type ‘key’.
# If not specified, "id_rsa" or "id_dsa" keys from ~/.ssh are used.
# ssh-key: id_dsa

[cm1]
# This optional section defines settings of centralized mail server 'cm1'.
# Fill this section's settings and list it in the 'centralized-mail-servers' setting of GLOBAL section
# to get the mail settings and content transferred from this server.
# Remove this section otherwise.

# [mandatory] ip
# An IP v4 address of this Plesk server.
ip:

# [mandatory] os
# Server's operating system type, 'unix' or 'windows'. Defines which other parameters
# are required in this section.
os: unix

# [optional] panel-username
# Panel administrator user name. If not specified, 'admin' is used.
# panel-username: admin

# [optional] panel-password
# Panel administrator password. If not specified, it is automatically detected.
# panel-password:

# [optional] ssh-username
# User name of the privileged system user on this Plesk server. If not specified, 'root' is used.
# ssh-username: root

# [optional] ssh-auth-type
# SSH authentication type.
# There are two authentication types supported: 'password' or 'key'. Default is 'password'.
# ssh-auth-type: password

# [optional] ssh-password
# Password of the privileged system user on this Plesk server.
# You must specify it, if you select SSH authentication type ‘password’.
# Note that the hash mark in password is treated as a regular symbol.
ssh-password:

# [optional] ssh-key
# SSH private key file name. You can specify it if you select SSL authentication type ‘key’.
# If not specified, "id_rsa" or "id_dsa" keys from ~/.ssh are used.
# ssh-key: id_dsa

# [optional] session-dir
# A directory for temporary files.
# If not specified, temporary files are put into /tmp.
# session-dir: /tmp

[cd1]
# This optional section defines settings of centralized DNS server 'cd1'.
# Fill this section's settings and list it in the 'centralized-dns-servers' setting of GLOBAL section
# to get the DNS forwarding set up on this server.
# Remove this section otherwise.

# [mandatory] ip
# An IP v4 address of this centalized DNS server.
ip:

# [optional] ssh-username
# User name of the privileged system user on this centralized DNS server. If not specified, 'root' is used.
# ssh-username: root

# [optional] ssh-auth-type
# SSH authentication type.
# There are two authentication types supported: 'password' or 'key'. Default is 'password'.
# ssh-auth-type: password

# [optional] ssh-password
# Password of the privileged system user on this centralized DNS server.
# You must specify it, if you select SSH authentication type ‘password’.
# Note that the hash mark in password is treated as a regular symbol.
ssh-password:

# [optional] ssh-key
# SSH private key file name. You can specify it if you select SSL authentication type ‘key’.
# If not specified, "id_rsa" or "id_dsa" keys from ~/.ssh are used.
# ssh-key: id_dsa

この構成ファイルは、Expand に登録された Plesk for Windows サーバからの移行時に使用します。

[GLOBAL]
# This section defines global settings and lists the source servers.
 
# [mandatory, non-modifiable] source-type
# Source servers product type.
# The other parameters in this configuration template are listed for this
# particular type, expand. Rather than changing the source-type here, browse the
# provided configuration templates and pick one that best suits your source type.
source-type: expand

# [mandatory, non-modifiable] target-type
# Target servers product type.
target-type: plesk

# [mandatory] source-servers
# Comma-separated list of the sections describing source Plesk servers connected to Expand.
# An arbitrary number of Plesk for Windows servers can be listed here.
# Order is important: Plesk server whose section is listed earlier in this list
# will have priority during conflict resolution.
source-servers: pfw1, pfw2

# [optional] external-db-servers
# Comma-separated list of the sections describing external source database servers.
# It is highly recommended to specify external database servers for remote MSSQL.
# Otherwise there could be issues when copying database content.
# external-db-servers: mssql1

# [optional] centralized-mail-servers
# Comma-separated list of the sections describing centralized mail servers assigned
# to the listed source Plesk servers.
# If the source Plesk servers listed in 'source-servers' setting are using
# a centralized mail server, you must list it here.
# If not specified, migration tool will not transfer the mailboxes and other settings
# located on the centralized mail servers.
# centralized-mail-servers: cm1

# [optional] centralized-dns-servers
# Comma-separated list of the sections describing centralized DNS servers assigned
# to the listed source Plesk servers.
# If not specified, the DNS forwarding will not be set up on the centralized DNS servers.
# centralized-dns-servers: cd1

# [optional] session-dir
# A directory for migration tool's temporary files.
# If not specified, temporary files will be put into 'migration-session'.
# session-dir: migration-session
 
# [optional] zones-ttl
# The time in seconds, which migration tool sets as the SOA minimum TTL and refresh interval
# on a new DNS server.
# If not specified, default value is assumed: 120
# zones-ttl: 120
 
# [optional] external-dns-server
# An IP v4 address of an external DNS server that allows recursive DNS queries.
# Migration tool uses the specified address to test whether general Internet users can obtain
# the correct DNS records for the transferred domains.
# If nothing is specified, migration tool will use Google DNS server (8.8.8.8).
# If 'none' is specified, migration tool will skip this test.
# external-dns-server: 8.8.8.8

# [optional] mail-messages-delta-limit
# The post-migration mail checks compare the number of messages in the source and the target mailboxes.
# If the number of messages differs more than it is specified in "mail-message-count-max-difference",
# it is considered an error.
# If not specified, default value is assumed: 10
# mail-messages-delta-limit: 10

# [optional] website-availability-check-timeout
# Timeout on site response in seconds. When check the availability of site, limit response time.
# If not specified, default value is assumed: 30
# website-availability-check-timeout: 30

# [optional] log-message-context-length
# When logging a multiline output (API request, response), show only top N
# and last N lines. Default value is 0, which means to display full API requests.
# log-message-context-length: 10

# [optional] copy-mssql-content
# Select way to copy MSSQL content: native MSSQL dumps, text dumps or automatic selection (default).
# Possible values: 'native', 'text', 'auto'
# Native backups require direct access of migration tool to all MSSQL servers, so make sure that you provided
# access to all external MSSQL servers in 'external-db-servers' option.
# Native backup is the most reliable way to copy MSSQL database content.
# Text dumps have an advantage that they do not require physical access to the servers. Only access by MSSQL
# protocols is required. But such way may fail in case of complex MSSQL databases with stored procedures, triggers, etc.
# If automatic selection is specified, panel migrator will use native backups if we have direct access to the servers
# with MSSQL, and text dumps otherwise.
# copy-mssql-content: auto

[plesk]
# This section defines target panel settings.

# [mandatory] ip
# An IPv4 address of the target Plesk Panel server.
ip:

# [mandatory] os
# Server's operating system type, 'unix' or 'windows'.
os: windows

# [optional] panel-username
# Panel administrator's login. If not specified, 'admin' is used.
# panel-username: admin

# [optional] panel-password
# Panel administrator password. If not specified, it is automatically detected.
# panel-password: setup

# [optional] windows-session-dir
# A directory for temporary files on Plesk Panel for Windows target server. If
# not specified, temporary files will be put into 'C:\migrator'
# windows-session-dir: C:\migrator

# [optional] is-local
# Whether migration tools are working on the same server as target Plesk.
# Default is true.
# is-local: true

[expand]
# This section defines the settings of Expand control panel server.
 
# [mandatory] ip
# An IP v4 address of the Expand control panel server.
# It does not matter whether this IP address is external or internal, as long as migration tool
# can connect to the server at this address.
ip:

# [mandatory] panel-username
# Expand administrator user name.
panel-username: root

# [mandatory] panel-password
# Expand administrator password.
panel-password:

# [optional] ssh-username
# User name of the privileged system user on Expand control panel server.
# If not specified, 'root' is used.
# ssh-username: root

# [optional] ssh-auth-type
# SSH authentication type.
# There are two authentication types supported: 'password' or 'key'. Default is 'password'.
# ssh-auth-type: password

# [optional] ssh-password
# Password of the privileged system user on Expand control panel server.
# You must specify it, if you select SSH authentication type ‘password’.
# Note that the hash mark in password is treated as a regular symbol.
ssh-password:

# [optional] ssh-key
# SSH private key file name. You can specify it if you select SSL authentication type ‘key’.
# If not specified, "id_rsa" or "id_dsa" keys from ~/.ssh are used.
# ssh-key: id_dsa

[pfw1]
# This section defines settings of source Plesk server 'pfw1'.

# [mandatory] ip
# An IP v4 address of this Plesk server.
ip:

# [mandatory] os
# Server's operating system type, 'unix' or 'windows'. Defines which other parameters
# are required in this section.
os: windows

# [optional] panel-username
# Panel administrator user name. If not specified, 'admin' is used.
# panel-username: admin

# [optional] panel-password
# Panel administrator password. If not specified, it is automatically detected.
# panel-password:

# [optional] windows-username
# User name of the privileged system user on this Plesk server. Default is 'Administrator'.
# windows-username: Administrator

# [mandatory] windows-password
# Password of the privileged system user on this Plesk server.
windows-password:

# [optional] session-dir
# A directory for temporary files.
# Note that for MySQL database content to be copied, this directory should be exported
# on rsync server as "migrator".
# If not specified, temporary files are put into C:\migrator.
# session-dir: C:\migrator

[pfw2]
# This section defines settings of source Plesk server 'pfw2'.

# [mandatory] ip
# An IP v4 address of this Plesk server.
ip:

# [mandatory] os
# Server's operating system type, 'unix' or 'windows'. Defines which other parameters
# are required in this section.
os: windows

# [optional] panel-username
# Panel administrator user name. If not specified, 'admin' is used.
# panel-username: admin

# [optional] panel-password
# Panel administrator password. If not specified, it is automatically detected.
# panel-password:

# [optional] windows-username
# User name of the privileged system user on this Plesk server. Default is 'Administrator'.
# windows-username: Administrator

# [mandatory] windows-password
# Password of the privileged system user on this Plesk server.
windows-password:

# [optional] session-dir
# A directory for temporary files.
# Note that for MySQL database content to be copied, this directory should be exported
# on rsync server as "migrator".
# If not specified, temporary files are put into C:\migrator.
# session-dir: C:\migrator

[cm1]
# This optional section defines settings of centralized mail server 'cm1'.
# Fill this section's settings and list it in the 'centralized-mail-servers' setting of GLOBAL section
# to get the mail settings and content transferred from this server.
# Remove this section otherwise.

# [mandatory] ip
# An IP v4 address of this centalized mail server.
ip:

# [mandatory] os
# Server's operating system type, 'unix' or 'windows'. Defines which other parameters are required
# in this section.
os: windows

# [optional] panel-username
# Panel administrator user name. If not specified, 'admin' is used.
# panel-username: admin

# [optional] panel-password
# Panel administrator password. If not specified, it is automatically detected.
# panel-password:

# [optional] windows-username
# User name of the privileged system user on this centralized mail server. Default is 'Administrator'.
# windows-username: Administrator

# [mandatory] windows-password
# Password of the privileged system user on this centralized mail server.
windows-password:

[cd1]
# This optional section defines settings of centralized DNS server 'cd1'.
# Fill this section's settings and list it in the 'centralized-dns-servers' setting of GLOBAL section
# to get the DNS forwarding set up on this server.
# Remove this section otherwise.

# [mandatory] ip
# An IP v4 address of this centalized DNS server.
ip:

# [optional] ssh-username
# User name of the privileged system user on this centralized DNS server. If not specified, 'root' is used.
# ssh-username: root

# [optional] ssh-auth-type
# SSH authentication type.
# There are two authentication types supported: 'password' or 'key'. Default is 'password'.
# ssh-auth-type: password

# [optional] ssh-password
# Password of the privileged system user on this centralized DNS server.
# You must specify it, if you select SSH authentication type ‘password’.
# Note that the hash mark in password is treated as a regular symbol.
ssh-password:

# [optional] ssh-key
# SSH private key file name. You can specify it if you select SSL authentication type ‘key’.
# If not specified, "id_rsa" or "id_dsa" keys from ~/.ssh are used.
# ssh-key: id_dsa

[mssql1]
# This optional section defines settings of external MSSQL database server 'mssql1'.
# Fill this section's settings and list it in the 'external-db-servers'
# setting of GLOBAL section to get the MSSQL databases copied from this server with native MSSQL backup.
# Remove this section otherwise.

# [mandatory] host
# The address of this database server, exactly as displayed in Plesk Panel (usually it equals
# to database server's IP address).
host:

# [mandatory] type
# Type of the database server, the only allowed value is 'mssql'
type: mssql

# [mandatory] ip
# An IP v4 address of this database server.
ip:

# [optional] windows-username
# User name of the privileged system user on this centralized mail server. Default is 'Administrator'.
# windows-username: Administrator

# [mandatory] windows-password
# Password of the privileged system user on this database server.
windows-password:
 

Leave your feedback on this topic here

If you have questions or need support, please visit the Plesk forum or contact your hosting provider.
The comments below are for feedback on the documentation only. No timely answers or help will be provided.